{"product_id":"new-one-mais-1-channel-automotive-oscilloscope-kit","title":"New One Mais 1-Channel Automotive Oscilloscope Kit","description":"\u003cp\u003eSee the waveform behind the reading with the \u003cstrong\u003eNew One Mais 1-Channel Automotive Oscilloscope Kit\u003c\/strong\u003e. This portable automotive instrument combines guided tests, a built-in color screen and five measurement and signal-generation modes, helping you spend less time configuring a capture and more time interpreting the signal.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuided setup:\u003c\/strong\u003e select a supported component to automatically configure time scale, voltage scale and trigger, or choose free oscilloscope mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive instruments in one:\u003c\/strong\u003e oscilloscope, voltmeter, ohmmeter with continuity, frequency meter and waveform generator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest loads and observe current:\u003c\/strong\u003e apply DC or PWM signals and monitor current consumption in real time, within the rated output limits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorkshop-ready viewing:\u003c\/strong\u003e 2.8-inch color TFT display with touch control, navigation keys and refresh rates up to 60 FPS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible positioning:\u003c\/strong\u003e integrated accelerometer, automatic 180-degree screen rotation and an external work light LED.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomotive power:\u003c\/strong\u003e 12–40V supply range for use with 12V and 24V vehicle systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGuided Test Profiles\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eActuators:\u003c\/strong\u003e injectors, diesel injectors, direct injection, PWM throttle bodies, VVTI, electric water pumps, high-pressure regulators, idle actuators and lambda-sensor PWM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIgnition:\u003c\/strong\u003e primary coil, power-coil primary, COP secondary and coil secondary.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSensors:\u003c\/strong\u003e Hall phase, inductive and Hall rotation, inductive ABS rotation, throttle position, lambda, MAP, magnetoresistive sensors, cranking vacuum transducers and controlled alternators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower:\u003c\/strong\u003e battery tests and power-supply lines. Use the specified probes, attenuators and safe connection procedures for each test.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: New One Mais.\u003c\/li\u003e\n\u003cli\u003eOscilloscope channels: 1.\u003c\/li\u003e\n\u003cli\u003eAnalog bandwidth (−3dB): 1MHz.\u003c\/li\u003e\n\u003cli\u003eA\/D resolution: 12 bits.\u003c\/li\u003e\n\u003cli\u003eAdvertised sampling figure: Up to 80MHz; this is not the analog bandwidth.\u003c\/li\u003e\n\u003cli\u003eInput impedance: 1MΩ.\u003c\/li\u003e\n\u003cli\u003eReading range: −40V to +40V.\u003c\/li\u003e\n\u003cli\u003eProcessing: Three-core architecture, up to 206MHz.\u003c\/li\u003e\n\u003cli\u003eOutput waveforms: PWM and DC.\u003c\/li\u003e\n\u003cli\u003eLoad-output capacity: Up to 10A, subject to manufacturer operating limits.\u003c\/li\u003e\n\u003cli\u003eIntegrated current measurement, short-circuit protection and overcurrent protection.\u003c\/li\u003e\n\u003cli\u003ePower supply: 12–40V; compatible with 12V and 24V automotive systems.\u003c\/li\u003e\n\u003cli\u003eDisplay: 2.8-inch color TFT, 320 × 240 pixels, up to 60 FPS.\u003c\/li\u003e\n\u003cli\u003eControls: Touch and navigation keys.\u003c\/li\u003e\n\u003cli\u003eUSB-C port for firmware updates, described as free in the source listing.\u003c\/li\u003e\n\u003cli\u003eMeasurements displayed include maximum voltage, minimum voltage, frequency and duty cycle.\u003c\/li\u003e\n\u003cli\u003eProduct dimensions and housing material: Not supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIncluded in the Mais Kit\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 New One interface instrument.\u003c\/li\u003e\n\u003cli\u003e1 one-meter power cable with female banana connector and hook-and-loop strap.\u003c\/li\u003e\n\u003cli\u003e1 four-meter power cable for remote-position diagnostics.\u003c\/li\u003e\n\u003cli\u003e1 two-meter actuator-test cable.\u003c\/li\u003e\n\u003cli\u003e1 green channel A cable.\u003c\/li\u003e\n\u003cli\u003e1 two-way plastic connector for extending the actuator cable.\u003c\/li\u003e\n\u003cli\u003e1 black alligator clip.\u003c\/li\u003e\n\u003cli\u003e1 green needle probe.\u003c\/li\u003e\n\u003cli\u003e1 Corvin transport bag.\u003c\/li\u003e\n\u003cli\u003e1 COP clamp.\u003c\/li\u003e\n\u003cli\u003e1 attenuator.\u003c\/li\u003e\n\u003cli\u003e1 quick-start manual with QR access to the full manual.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eGetting Started \u0026amp; Safe Use\u003c\/h3\u003e\u003cp\u003eFollowing the supplied instructions, connect to a suitable 12–40V vehicle supply, connect the negative reference before the probe, and select a guided test or free oscilloscope mode. Consult the full manual for grounding, attenuation, compatibility and output limits before testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot for 110V or 220V mains measurements.\u003c\/strong\u003e This equipment is intended for automotive systems within its specified limits. Use appropriate protective accessories for ignition measurements, and do not assume that a guided profile removes the need for safe test procedures.\u003c\/p\u003e\u003cp\u003eKeep the instrument dry, disconnect before cleaning, protect connectors and store the equipment and cables in the supplied bag. Follow the manual for bench testing actuators and firmware updates.\u003c\/p\u003e\u003ch3\u003eManufacture, Warranty \u0026amp; Support\u003c\/h3\u003e\u003cp\u003eMade in Brazil by Mecânica Avançada (DMA Electronics), according to the supplied product information. The source states a 12-month manufacturer warranty, comprising 90 days described as legal coverage and the remaining period as contractual coverage, plus online technical support. Confirm the applicable terms, regional coverage and support language before purchase.\u003c\/p\u003e\u003cp\u003eBring signal capture, electrical measurements and actuator testing together in one portable kit for your next diagnostic session.\u003c\/p\u003e","brand":"Mecânica Avançada (DMA Electronics)","offers":[{"title":"Default Title","offer_id":42871344496722,"sku":"SKU_1793749886166_242","price":892.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1718\/7061\/files\/D_NQ_NP_840269-MLB118115573951_092026-O-new-one-mais-osciloscopio-automotivo-1-canal-sinais-guiados.jpg?v=1793749888","url":"https:\/\/www.buybrazil10.com\/ar\/products\/new-one-mais-1-channel-automotive-oscilloscope-kit","provider":"BuyBrazil","version":"1.0","type":"link"}