Amplifier Module kit for the activation of Multvias type box 1500 Watts
Complete amplifier kit for the activation of Multvias type boxes
Mono amplifier module to operate on active + slave system
Easy installation plug and play system
Where to use: In professional acoustic boxes of the average acute type, also known as fullrange. It can be applied to any type of box, such as trapezoidal, line arrays, stage returns, side fill, and other models.
Full bodied, medium-bodied stems with no exaggerations and crystalline aguods. Can equip boxes for outdoor and indoor sound in presentations, shows, cinemas, home theaters, etc ...
This type of trigger is not suitable for sub bass boxes.
Note: Two- or three-way full range multifunction boxes require professional frequency dividers for optimal performance and long life of speakers, drives and tweets. Frequency splitters are mandatory items in this type of box.
Capacitors do not play the part of frequency dividers and are twist-type options, condemning the speaker to a poor sound resolution and short life of your transducers.
Volt 110/220 volt bi-voltage power supply with manual selection.
Mono D amplifier module (digital)
A 1500 watt RMS channel (real) at minimum load of 4 ohms. Can not work below 4 ohms
1500 watts at 4 ohms or 750 watts at 8 ohms
Power calculated with 1KHz sinusoidal tone
Through band or response range: from 30 Hz to 30 Khz flat
Distortion: better than 0.10% to 75% of maximum power
Signal noise ratio: better than 95%
Damping factor: greater than 200 in 4 ohms load
Module size: 250 x 157 mm
Light on / off button
Led operation indicator
One balanced P10 input with independent volume control
One balanced XLR input with independent volume control
One XLR output for audio link
One SPEAKON output for slave box connection.
Three-way, medium and low-pitched equalizer with 15 db of variation.
Sub sonic filter with 30 Hz cut
Panel size: 191 x 140 mm
Weight: 1.8 kg