{"product_id":"taramps-6-fh-300s-6-inch-4-ohm-speakers-150w-rms-each-pair","title":"Taramps 6-FH 300S 6-Inch 4-Ohm Speakers, 150W RMS Each, Pair","description":"\u003cp\u003eBuild your speaker project around a matched model pair: two Taramps 6-FH 300S 6-inch drivers in black. Designed for a broad listed frequency range, these drivers emphasize reproduction from midbass through the higher frequencies for compatible sound systems.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePair includes two Taramps 6-FH 300S speaker drivers.\u003c\/li\u003e\n\u003cli\u003eListed power handling of 150W RMS per driver, or 300W RMS combined across the pair.\u003c\/li\u003e\n\u003cli\u003eNominal impedance of 4 ohms per driver.\u003c\/li\u003e\n\u003cli\u003eListed frequency response from 90Hz to 18kHz.\u003c\/li\u003e\n\u003cli\u003ePhase plug and cellulose horn described in the supplied product information.\u003c\/li\u003e\n\u003cli\u003eSteel basket and CCAW voice-coil wire.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCore Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: Taramps\u003c\/li\u003e\n\u003cli\u003eModel: 6-FH 300S\u003c\/li\u003e\n\u003cli\u003eQuantity: Two drivers\u003c\/li\u003e\n\u003cli\u003eNominal diameter: 6 inches each\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003ePower handling: 150W RMS each\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 4 ohms each\u003c\/li\u003e\n\u003cli\u003eSensitivity: Listed as 93.015dB at 1W\/1m, free-air.\u003c\/li\u003e\n\u003cli\u003eFrequency response: 90Hz–18,000Hz; tolerance unspecified.\u003c\/li\u003e\n\u003cli\u003eVoice-coil diameter: 1.5 inches\u003c\/li\u003e\n\u003cli\u003eVoice-coil height: 10.5mm\u003c\/li\u003e\n\u003cli\u003eVoice-coil wire: Round-section CCAW\u003c\/li\u003e\n\u003cli\u003eVoice-coil former: Kapton, according to the source.\u003c\/li\u003e\n\u003cli\u003eBasket: Steel\u003c\/li\u003e\n\u003cli\u003eMagnet material: Barium ferrite\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eListed Driver Parameters\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eResonant frequency (Fs): 105.393Hz\u003c\/li\u003e\n\u003cli\u003eQms: 3.791; Qes: 0.657; Qts: 0.560\u003c\/li\u003e\n\u003cli\u003eEquivalent compliance volume (Vas): 7.305L\u003c\/li\u003e\n\u003cli\u003eMoving mass (Mms): 9.355g; diaphragm mass (Mmd): 8.348g\u003c\/li\u003e\n\u003cli\u003eForce factor (BL): 5.317Tm\u003c\/li\u003e\n\u003cli\u003eVoice-coil inductance at 10kHz: 0.2008mH\u003c\/li\u003e\n\u003cli\u003eEffective cone area (Sd): 0.0145 square meters\u003c\/li\u003e\n\u003cli\u003eListed Xmax: ±3.7mm\u003c\/li\u003e\n\u003cli\u003eGap flux density: 10,700 gauss\u003c\/li\u003e\n\u003cli\u003eMagnet dimensions: 115 x 56 x 18mm\u003c\/li\u003e\n\u003cli\u003eGap height: 6.35mm\u003c\/li\u003e\n\u003cli\u003eListed driver displacement within an enclosure: 0.60L\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eParameters are taken from the supplied listing, not independent measurements. The source lists two DC-resistance values, 3.0 and 5.6 ohms, without identifying the applicable version. Confirm the correct 4-ohm model datasheet before designing an enclosure. Vas and driver displacement are not recommended enclosure volumes.\u003c\/p\u003e\u003ch2\u003ePower, Wiring and Fit\u003c\/h2\u003e\u003cp\u003eThe combined 300W RMS figure represents the sum of two 150W RMS ratings, not 300W per speaker. Each driver remains nominally 4 ohms; final amplifier load depends on the wiring arrangement. Have a qualified installer verify amplifier compatibility, enclosure design, filtering, polarity and operating levels.\u003c\/p\u003e\u003cp\u003eThe nominal 6-inch size does not establish the mounting cutout, bolt pattern or depth. Confirm actual fitting dimensions before modifying an enclosure. A broad frequency-response listing does not guarantee deep-subwoofer performance or compatibility with every system.\u003c\/p\u003e\u003ch2\u003eContents and Care\u003c\/h2\u003e\u003cp\u003eIncludes two Taramps 6-FH 300S drivers. Enclosures, amplifiers, cables, crossover networks and mounting accessories are not specified as included.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDisconnect the amplifier before installation or wiring.\u003c\/li\u003e\n\u003cli\u003eAvoid clipping and excessive low-frequency excursion; follow the manufacturer's recommended operating limits.\u003c\/li\u003e\n\u003cli\u003eKeep dry and protect cones and terminals from impact or damage.\u003c\/li\u003e\n\u003cli\u003eUse hearing-safe listening levels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe specification section states a weight of 1.96kg without explicitly confirming whether it applies per driver or per pair. Confirm this before shipping calculations; no packed shipping weight is claimed.\u003c\/p\u003e","brand":"Taramps","offers":[{"title":"Default Title","offer_id":42766400159826,"sku":"SKU_1790604499415_567","price":167.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1718\/7061\/files\/D_NQ_NP_2X_782611-MLU77912641399_072024-F.jpg?v=1790604501","url":"https:\/\/www.buybrazil10.com\/it\/products\/taramps-6-fh-300s-6-inch-4-ohm-speakers-150w-rms-each-pair","provider":"BuyBrazil","version":"1.0","type":"link"}