Soundigital SD5000.1 EVO 5 5000W RMS Mono Car Amplifier
Soundigital SD5000.1 EVO 5 5000W RMS Mono Car Amplifier
Mono amplification for a purpose-built car audio system
The SounDigital SD5000.1 EVO 5 is a mono car audio amplifier with a listed 5,000W RMS power rating. This listing offers separate 1-ohm and 2-ohm versions. Adjustable filters and RCA or high-level input options help a qualified installer configure a compatible system.
Picture your next listening session after your speakers, electrical supply and gain settings have been carefully matched. The compact enclosure gives you a practical starting point for planning a high-output installation without treating electrical support as an afterthought.
Key Benefits
- Single-channel amplification with separate 1-ohm and 2-ohm versions available.
- Adjustable low-pass filter from 50Hz–6kHz.
- Adjustable subsonic high-pass filter from 5–80Hz.
- Listed RCA and high-level input options.
- SSS (SounDigital Smart Start) for automatic turn-on with compatible high-level connections; verify connection requirements in the manual.
- Compact 25 × 18 × 6.32cm enclosure.
Power Ratings and Version Selection
The existing specifications list the following outputs for the 1-ohm version:
| Amplifier Version | Speaker Load | Listed RMS Output |
|---|---|---|
| 1 ohm | 1 ohm | 5,000W |
| 1 ohm | 2 ohms | 3,300W |
| 1 ohm | 4 ohms | 2,178W |
The available listing does not state the power-test voltage or a separate output table for the 2-ohm version. Confirm the exact version's output in the manufacturer's manual before purchase. Do not apply the 1-ohm version's table to the 2-ohm version.
The selected option identifies a distinct amplifier version, not a switchable impedance setting. Actual output depends on supply voltage, speaker load and operating conditions.
Listed Specifications
- Brand: SounDigital
- Model: SD5000.1 EVO 5
- Channels: 1 (mono)
- Available versions: 1 ohm and 2 ohms
- Frequency response: 5Hz–6kHz (-3dB)
- Low-pass filter: 50Hz–6kHz, 12dB/octave
- Subsonic filter: 5–80Hz, 12dB/octave
- Listed supply range: 8–16V DC
- RCA input sensitivity: 0.2–2V
- High-level input sensitivity: 1.5–15V
- Listed signal-to-noise ratio: 90dB
- Listed efficiency: 86%
- Listed damping factor: greater than 2,000 at 100Hz
- Listed current consumption: 230A with music; 461A maximum
- Dimensions: 25 × 18 × 6.32cm
- Listed product weight: 2.75kg
Electrical Planning and Installation
The existing listing references a 250A fuse for musical use, a minimum 250Ah battery and 50mm² power cable. Treat these as planning references, not a complete installation prescription. A qualified installer must verify version-specific cable sizing, circuit protection, charging capacity, grounding and ventilation against the manufacturer's manual.
Battery capacity alone does not establish that a vehicle's electrical system can support this amplifier. The listed supply range does not guarantee full output at low voltage. Verify speaker impedance and power handling, and do not operate below the selected version's rated minimum load.
Package Contents and Warranty
The existing listing specifies one SD5000.1 EVO 5 amplifier, a manual and a warranty certificate. A one-year warranty is listed; check the supplied terms for coverage and conditions.
Choose the impedance version that matches your planned speaker configuration and build your installation around its verified ratings.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Free Shipping
On orders over $75 worldwide
Order Tracking
Real-time tracking on every order
Expert Support
Beauty consultants ready to help
Secure Checkout
256-bit SSL encrypted payments
Testimonials