{"product_id":"banda-ice-x-3002-3000w-rms-mono-car-amplifier-2-ohms","title":"Banda ICE X 3002 3000W RMS Mono Car Amplifier 2 Ohms","description":"\u003ch2\u003eHigh-output mono amplification for your 2-ohm car audio setup\u003c\/h2\u003e\u003cp\u003ePlan your next audio upgrade around the Banda Audioparts ICE X 3002, identified in this listing as a 3,000W RMS mono car amplifier with a 2-ohm minimum speaker load. Match it to compatible speakers and a properly designed electrical system.\u003c\/p\u003e\u003cp\u003ePicture your first listening session after a professional has set the gain, configured the crossover, and checked the speaker wiring. A carefully matched installation puts the amplifier's power to work for your system rather than relying on a power figure alone.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSingle-channel amplification for a compatible car audio installation.\u003c\/li\u003e\n\u003cli\u003eListed output of 3,000W RMS at 2 ohms and 12.6V.\u003c\/li\u003e\n\u003cli\u003eGain control and an active low-pass crossover for configuration.\u003c\/li\u003e\n\u003cli\u003eVariable subsonic filter and clipping indicator.\u003c\/li\u003e\n\u003cli\u003eAluminum chassis as described in the existing product information.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePower Ratings in the Existing Listing\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSupply Voltage\u003c\/th\u003e\n\u003cth\u003eSpeaker Load\u003c\/th\u003e\n\u003cth\u003eListed RMS Output\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e12.6V\u003c\/td\u003e\n\u003ctd\u003e2 ohms\u003c\/td\u003e\n\u003ctd\u003e3,000W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12.6V\u003c\/td\u003e\n\u003ctd\u003e4 ohms\u003c\/td\u003e\n\u003ctd\u003e1,800W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eOutput depends on supply voltage and speaker load. This is the 2-ohm version, not the 1-ohm ICE X 3001.\u003c\/p\u003e\u003ch3\u003eSpecifications \/ Key Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand: Banda Audioparts\u003c\/li\u003e\n\u003cli\u003eModel identified in the product title: ICE X 3002\u003c\/li\u003e\n\u003cli\u003eConfiguration: Mono\u003c\/li\u003e\n\u003cli\u003eRated minimum speaker load: 2 ohms\u003c\/li\u003e\n\u003cli\u003eOperating class in the source description: Class D\u003c\/li\u003e\n\u003cli\u003eListed frequency response: 18Hz–20kHz (-3dB)\u003c\/li\u003e\n\u003cli\u003eListed active low-pass crossover: 18Hz–25kHz, Linkwitz-Riley, 12dB\/octave\u003c\/li\u003e\n\u003cli\u003eListed subsonic filter range: 18–120Hz\u003c\/li\u003e\n\u003cli\u003eInput impedance: 22k ohms\u003c\/li\u003e\n\u003cli\u003eInput sensitivity: 150mV–2.1V\u003c\/li\u003e\n\u003cli\u003eTHD: Less than 0.33%\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: Greater than 74.3dB\u003c\/li\u003e\n\u003cli\u003eDamping factor: Greater than 100\u003c\/li\u003e\n\u003cli\u003eGain control and differential signal input\u003c\/li\u003e\n\u003cli\u003eListed current consumption with a music signal: 155A\u003c\/li\u003e\n\u003cli\u003eListed dimensions: 308 × 264 × 60mm\u003c\/li\u003e\n\u003cli\u003eBlue LED: Power status\u003c\/li\u003e\n\u003cli\u003eRed LED: Clipping or output short-circuit indication\u003c\/li\u003e\n\u003cli\u003eYellow LED: Low battery-voltage indication\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eVersion and Installation Check\u003c\/h3\u003e\u003cp\u003eThe source description refers to ICE 3002 and ICE 3000, while the product title identifies ICE X 3002. Technical values above are carried over from that description. Confirm the exact model's specifications, crossover range, dimensions, and electrical requirements against its manufacturer's documentation before system design.\u003c\/p\u003e\u003cp\u003eProfessional installation is recommended. Have your installer verify speaker impedance and power handling, wiring, circuit protection, cable sizing, electrical capacity, and ventilation. The source lists a minimum power-cable size of 21mm²; the installer must validate the requirement for the exact model and cable run. Do not operate below the rated minimum speaker load.\u003c\/p\u003e\u003ch3\u003ePackage and Warranty Information\u003c\/h3\u003e\u003cp\u003eThe source listing specifies one amplifier, a manual, and a one-year warranty. Refer to the supplied documentation for exact model identification, coverage, and conditions.\u003c\/p\u003e\u003ch3\u003eListening Safety\u003c\/h3\u003e\u003cp\u003eProlonged exposure to sound levels above 85dB can damage hearing. Use responsible listening levels.\u003c\/p\u003e\u003cp\u003eChoose the ICE X 3002 2-ohm version and build your installation around its verified requirements.\u003c\/p\u003e","brand":"Banda Audioparts","offers":[{"title":"Default Title","offer_id":12441176244259,"sku":"","price":239.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1718\/7061\/products\/banda-audioparts-amplifier-default-title-banda-ice-x-3002-amplifier-module-power-2-ohm-3000-watts-rms-23301427986514.jpg?v=1782241551","url":"https:\/\/www.buybrazil10.com\/zh\/products\/banda-ice-x-3002-3000w-rms-mono-car-amplifier-2-ohms","provider":"BuyBrazil","version":"1.0","type":"link"}