Expert Electronics X6 AiR 6-Channel Car Audio DSP

Fine-tune a compatible car audio system with the Expert Electronics X6 AiR 6-Channel Car Audio DSP. Six independent outputs, a 28-band input equalizer and wireless app control give you flexible adjustment for a multi-amplifier installation.

Control Your System's Sound

• Six independent outputs: tailor processing to your speaker and amplifier configuration, including compatible active-system layouts.
• 28-band input equalizer: shape the incoming signal with a listed gain range of −12 to +12dB.
• Per-channel parametric EQ: one parametric band per channel for additional adjustment.
• Three crossover filter types: Linkwitz-Riley, Butterworth and Bessel. These are filter families, not a specification of three crossover ways.
• Individual output processing: mute, phase, limiter, gain, delay and reset.
• Configuration memory: save complete setups and recall them when needed.
• Custom device naming: identify the processor through the app in multi-device installations.
• Bluetooth app control: adjust settings from a compatible phone. The original listing specifies a range of up to 15m; actual range depends on installation and surroundings. Music streaming over Bluetooth is not confirmed by the supplied information.

Equalization & Crossover

• Input EQ: 28 bands.
• Parametric EQ: one band per channel.
• EQ gain range: −12 to +12dB.
• Crossover frequency range: 20Hz–20kHz.
• Filter types: Linkwitz-Riley, Butterworth and Bessel.
• Listed attenuation slopes: 6, 12, 18, 24, 36 and 48dB/octave.
• Preset memory: complete configuration saves.

Inputs & Outputs

• Inputs: two RCA inputs, left and right.
• Input type: listed as electronically balanced.
• Maximum input level: 4.00Vrms (+14dBu).
• Input impedance: 100kΩ.
• Outputs: six RCA outputs.
• Output type: listed as electronically balanced.
• Maximum output level: 3.50Vrms (+13dBu).

The original listing gives an output impedance of 100kΩ, identical to its input-impedance entry. Confirm this figure in the exact model's manual before using it for system design.

DSP Performance

• Frequency response: 10Hz–24kHz (−1dB).
• THD+N: less than 0.01%.
• Signal latency: less than 0.6ms.
• Listed processing depth: 32-bit.
• Sampling rate: 96kHz.

Power & Dimensions

• Power supply: 10–15VDC.
• Maximum current consumption: 300mA.
• Product dimensions: 150 × 110 × 43mm.
• Product weight stated in the original description: 0.30kg.

App Compatibility

The original listing identifies iOS and Android app control and an Android minimum of 4.3. Current operating-system requirements, regional app availability and compatibility with your phone should be checked before purchase. Compatibility with every iOS version is not verified.

In the Box

• 1 × Expert Electronics X6 AiR processor.
• User manual.

Installation & Care

This is a signal processor, not a speaker power amplifier. Use compatible source equipment and amplification, and follow the manufacturer's wiring, power and setup instructions. Professional installation and tuning are recommended. Keep the unit dry and provide appropriate mounting and ventilation.

The recorded shipping weight is 0.50kg, distinct from the source-listed 0.30kg product weight. Confirm the complete packed weight before shipment. Device dimensions are not shipping-carton dimensions.

No warranty duration is specified in the supplied information. Confirm applicable manufacturer warranty and regional support terms before purchase.

Choose the X6 AiR for detailed, app-controlled adjustment of a compatible six-output car audio system.