JBL 6TRMS80 & 5TRMS80 Speakers + Taramps TS400 Kit

Build a four-speaker car-audio setup

Bring music to the drive with a kit pairing two JBL 6TRMS80 speakers and two smaller JBL speakers with a Taramps TS400 four-channel amplifier. The included components give an installer a starting point for a coordinated car-audio system; confirm fit, wiring and impedance before installation.

What's in the kit

• Two JBL 6TRMS80 three-way speakers, listed as 6-inch, 4 ohms and 80 W RMS each.
• Two JBL three-way speakers, listed as 5-inch, 4 ohms and 80 W RMS each. The source alternates between model codes 5TRMS80 and 5TRMS8; verify the model on the actual units before purchase.
• One Taramps TS400 four-channel amplifier.
• The source also lists a manual and warranty certificate; check the supplied paperwork for applicable terms.

Listed specifications

• 6TRMS80 speakers: 60 Hz–20 kHz frequency response, 87 dB sensitivity (1 W/1 m), polypropylene (PP) cone and dynamic tweeter.
• Smaller speakers: 76 Hz–20 kHz frequency response, 87 dB sensitivity (1 W/1 m), polypropylene (PP) cone and dynamic tweeter. The source's size and millimetre measurements conflict, so check physical fit against the units.
• TS400 amplifier: four channels; listed output at 13.8 V DC of 4 × 100 W RMS at 2 ohms, 4 × 63 W RMS at 4 ohms or 2 × 200 W RMS bridged at 4 ohms, depending on configuration.
• TS400 listed frequency response: 18 Hz–30 kHz (-1 dB); amplifier dimensions: 13.8 × 4.9 × 12.1 cm (W × H × D); amplifier-only weight: 0.6 kg.

Have a qualified installer verify speaker fit, load, wiring, power supply and safe ventilation. The 0.6 kg figure describes only the amplifier, not the total kit or packed shipping weight. The source mentions a 273-day warranty, but BuyBrazil's applicable warranty terms have not been verified.