Expert Electronics MX-1 4-Channel Car Audio Equalizer

Bring hands-on sound control to your car audio setup

The Expert Electronics MX-1 combines four input channels with four-band equalization for a compatible car audio installation. RCA and P10 connections provide options for integrating source equipment, while its 9–15V DC operating range supports a properly designed automotive setup.

Picture your next listening session after the low, mid-low, mid-high, and high bands have been adjusted to suit your system. The MX-1 gives you a dedicated signal-control stage ahead of your external amplifiers.

Key Benefits

• Four input channels for a flexible source configuration.
• Four-band EQ to shape bass, midrange, and treble balance.
• RCA and P10 connections as listed in the source information.
• Remote start and a listed 300mA remote output.
• Compact ABS housing for installation planning.

Specifications / Key Features

• Brand: Expert Electronics
• Model: MX-1
• Product type: Car audio mixer and equalizer
• Input channels: 4
• Output configuration: Described in the source as two output ways; confirm routing in the manual
• Equalizer bands: Low, mid-low, mid-high, and high
• Low EQ: 60Hz, ±15dB
• Mid-low EQ: 250Hz, ±15dB
• Mid-high EQ: 2kHz, ±15dB
• High EQ frequency: 12kHz; adjustment range not fully specified in the source
• Connections: RCA and P10 (6.3mm)
• Frequency response: 20Hz–20kHz
• Listed microphone amplification range: -20dB to +20dB
• Listed impedance: 10k ohms
• Listed signal-to-noise ratio: 110dB
• Operating voltage: 9–15V DC
• Remote start
• Remote output: 300mA
• Maximum power consumption: 5W
• Housing: ABS
• Approximate device dimensions: 16 × 24 × 4cm

Package Contents

• One Expert Electronics MX-1 unit
• Two cables, as listed in the source
• Instruction manual

Warranty

The existing listing specifies a one-year warranty. Refer to the supplied warranty documentation for coverage and conditions.

Compatibility and Installation

This device controls audio signals; it is not a power amplifier and does not directly drive speakers. Use it with compatible source equipment and external amplifiers.

Professional installation is recommended. Confirm connector assignments, output routing, microphone support, power wiring, and remote-output limits against the manufacturer's manual.

The source's distortion and maximum-input-level notation is ambiguous, so those values are not presented here as confirmed specifications. Verify them in the manual before relying on them for system design.

Shape your next car audio setup with dedicated four-band control from the MX-1.