Banda ICE X 3002 3000W RMS Mono Car Amplifier 2 Ohms
Banda ICE X 3002 3000W RMS Mono Car Amplifier 2 Ohms
High-output mono amplification for your 2-ohm car audio setup
Plan your next audio upgrade around the Banda Audioparts ICE X 3002, identified in this listing as a 3,000W RMS mono car amplifier with a 2-ohm minimum speaker load. Match it to compatible speakers and a properly designed electrical system.
Picture your first listening session after a professional has set the gain, configured the crossover, and checked the speaker wiring. A carefully matched installation puts the amplifier's power to work for your system rather than relying on a power figure alone.
Key Features
- Single-channel amplification for a compatible car audio installation.
- Listed output of 3,000W RMS at 2 ohms and 12.6V.
- Gain control and an active low-pass crossover for configuration.
- Variable subsonic filter and clipping indicator.
- Aluminum chassis as described in the existing product information.
Power Ratings in the Existing Listing
| Supply Voltage | Speaker Load | Listed RMS Output |
|---|---|---|
| 12.6V | 2 ohms | 3,000W |
| 12.6V | 4 ohms | 1,800W |
Output depends on supply voltage and speaker load. This is the 2-ohm version, not the 1-ohm ICE X 3001.
Specifications / Key Features
- Brand: Banda Audioparts
- Model identified in the product title: ICE X 3002
- Configuration: Mono
- Rated minimum speaker load: 2 ohms
- Operating class in the source description: Class D
- Listed frequency response: 18Hz–20kHz (-3dB)
- Listed active low-pass crossover: 18Hz–25kHz, Linkwitz-Riley, 12dB/octave
- Listed subsonic filter range: 18–120Hz
- Input impedance: 22k ohms
- Input sensitivity: 150mV–2.1V
- THD: Less than 0.33%
- Signal-to-noise ratio: Greater than 74.3dB
- Damping factor: Greater than 100
- Gain control and differential signal input
- Listed current consumption with a music signal: 155A
- Listed dimensions: 308 × 264 × 60mm
- Blue LED: Power status
- Red LED: Clipping or output short-circuit indication
- Yellow LED: Low battery-voltage indication
Version and Installation Check
The source description refers to ICE 3002 and ICE 3000, while the product title identifies ICE X 3002. Technical values above are carried over from that description. Confirm the exact model's specifications, crossover range, dimensions, and electrical requirements against its manufacturer's documentation before system design.
Professional installation is recommended. Have your installer verify speaker impedance and power handling, wiring, circuit protection, cable sizing, electrical capacity, and ventilation. The source lists a minimum power-cable size of 21mm²; the installer must validate the requirement for the exact model and cable run. Do not operate below the rated minimum speaker load.
Package and Warranty Information
The source listing specifies one amplifier, a manual, and a one-year warranty. Refer to the supplied documentation for exact model identification, coverage, and conditions.
Listening Safety
Prolonged exposure to sound levels above 85dB can damage hearing. Use responsible listening levels.
Choose the ICE X 3002 2-ohm version and build your installation around its verified requirements.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Free Shipping
On orders over $75 worldwide
Order Tracking
Real-time tracking on every order
Expert Support
Beauty consultants ready to help
Secure Checkout
256-bit SSL encrypted payments
Testimonials