Taramps HV3000 Chipeo Smart High-Voltage Amplifier

Controlled power for specialist car-audio systems

The Taramps HV 3000 Chipeo Smart is a single-channel Class D amplifier described for high-voltage car-audio installations. Its Power Control System is described as managing output across compatible supply and load configurations; confirm exact limits in the manufacturer's manual before planning a build.

Listed output and features

• Listed maximum output: 3,000 W RMS at 1 ohm or 2 ohms; 2,000 W RMS at 4 ohms. These are alternative speaker-load ratings, not simultaneous outputs.
• One channel with a listed 10 Hz–30 kHz frequency response (-3 dB at 2 ohms).
• Source describes controlled thermal protection, output short-circuit and high/low-voltage protection. These features do not replace proper installation.

Specifications from the original listing

• Model: Taramps HV3000 Chipeo Smart; Class D; one channel.
• Listed high-voltage supply range: 200–350 V DC. The source gives conflicting battery-count examples (10–24 and 18–24 in series); do not use them as wiring instructions. Confirm the permitted supply/load combinations with Taramps.
• Listed input sensitivity: 0.5–4 V RMS; frequency response: 10 Hz–30 kHz (-3 dB at 2 ohms).
• Unit dimensions (W × H × D): 23.9 × 7.3 × 32.9 cm. Listed gross amplifier weight: 3.95 kg; packed shipping weight and package dimensions were not provided.
• Listed package contents: one HV 3000 amplifier and one two-way 12 V DC power connector. Check actual stock and the manufacturer's manual for connector use; a 12 V connector does not make this a conventional 12 V amplifier.

High-voltage safety: Series-connected batteries and this equipment can cause fatal electric shock. Only an appropriately qualified professional should install or service it using manufacturer documentation, suitable isolation, protection, wiring and ventilation. Warranty terms were not provided.