Taramps HV 90–180 CHIPEO High-Voltage Amplifier

High-voltage amplification for specialist competition builds

The Taramps HV 90–180 CHIPEO is a single-channel amplifier described for high-voltage car-audio systems. Flexible Power operation depends on a compatible battery-bank voltage and speaker load. This equipment requires professional system design and is not a conventional 12 V amplifier.

Output ratings stated in the source

• At 315 V DC and a 0.25-ohm load, the source lists a maximum of 180,000 W RMS for competition.
• At 315 V DC and a 0.5-ohm load, the source lists a maximum of 90,000 W RMS. The higher 0.25-ohm figure does not apply to this load.
• The separate described working range is 160–350 V DC at 0.5 ohm; the source also gives broader 10–360 V DC supply limits. Confirm every voltage/load combination with the manufacturer's documentation before use.

Listed specifications

• Model: Taramps HV 90–180 CHIPEO; one channel.
• Listed input sensitivity: 360 mV at 1 ohm with gain at 100%; input impedance: 15 kΩ.
• Listed frequency response: 10 Hz–5 kHz (-1 dB); THD: 0.3%; signal-to-noise ratio: >95 dB.
• Listed idle current: 125 mA. The source's current-draw lines do not establish complete operating conditions for the 180,000 W setting; verify electrical requirements with Taramps.
• Source lists output short-circuit, low-impedance, voltage and thermal protection. Correct isolation, wiring, fusing and cooling are still required.
• Unit dimensions (W × H × D): 239 × 72 × 409 mm; listed unit weight: 5.1 kg. Packed shipping weight and package contents were not provided.

High-voltage safety: Series-connected battery banks can cause fatal electric shock. Only an appropriately qualified professional should install or service this system using the manufacturer's documentation. Warranty and return wording in the original listing has not been verified as BuyBrazil policy.