Banda Electra Bass 3K1 Amplifier Module 3000 Watts RMS 1 ohm

ELECTRA Series – Unmatched Bass Power and Precision

The ELECTRA line was specially developed for audio enthusiasts who demand deep, powerful bass. With a frequency response ranging from 16Hz to 500Hz (-3dB), the ELECTRA is engineered to drive only subwoofers, low frequencies, and part of the mid-bass range with exceptional clarity and impact.

One of its standout features is the Bass Boost control, adjustable between 30Hz and 80Hz, which further enhances the low-end punch of your system.

Housed in a sleek, 100% aluminum chassis, this amplifier delivers 3000 WRMS of power through a single input channel at 1 Ohm impedance. It boasts extremely low harmonic distortion (<1%) and includes a Clipping Indicator for optimal performance monitoring. To ensure durability and safety, it features thermal protection with temperature-activated micro fans and short-circuit protection.

With its clean, bold design, the ELECTRA amplifier integrates seamlessly into any custom sound setup.

Technical Specifications

• Maximum Power @ 12.6V / 1 Ohm: 3000 WRMS

• Maximum Power @ 12.6V / 2 Ohms: 2100 WRMS

• Efficiency @ 1 Ohm: 76%

• Input Voltage: 9V – 15V

• Input Impedance: 100K Ohms

• THD+N: <1%

• Input Sensitivity: 150mV – 8V

• Signal-to-Noise Ratio: 80dB

• Frequency Response: 20Hz – 500Hz (-3dB)

• Bass Boost @ 30-80Hz: Adjustable from 0 to +12dB

• HPF (Subsonic Filter): 16Hz to 100Hz @ 12dB/octave Linkwitz-Riley

• LPF (Crossover): 80Hz to 500Hz @ 12dB/octave Linkwitz-Riley

• Recommended Fuse: 150A

• Idle Current Draw: 2.5A

• Maximum Current Draw (musical signal): 180A

• Recommended Power Cable (min.): 35mm²

• Recommended Output Cable (min.): 2 x 4mm² / 2 x 11 AWG

• Weight: 3.7kg (8.16 lbs)

• Height: 63mm (2.48 in)

• Width: 225mm (8.86 in)

• Depth: 236mm (9.29 in)

• Cooling: Temperature-controlled micro fans

• Protections: Thermal and short-circuit protection

• Signal Input: RCA

• Chassis: Full aluminum construction